FEATURES
Chassis: 0.12 (3mm) thick 6061-T6 aluminum, aluminum center brace
and composite side pods
Drive: Four wheel with steel driveshafts
Radio: Spektrum STX2, 2-channel with SRX200 receiver
Steering Servo: ADS-15M waterproof metal gear with 195 oz-in
(15 kg-cm) torque 6V and never loose aluminum servo saver
metal horn and 25T spline
Motor: BLX4074 2050Kv 4-pole non-sensored brushless (ARAG2000)
ESC: Waterproof BLX185 150A 6S with built-in cooling fan, and IC5
battery connector (EC5 compatible)
Shocks: 16mm anodized aluminum body, oil filled, aluminum top
and bottom caps, 0.16 (4mm) diameter shaft, filled with 1000cst
silicone shock oil
Shock Towers: Black anodized aluminum 0.16 (4mm) thick
Suspension: Pivot ball with anti-roll bar
Body: Trimmed and painted with new matte trim scheme, new mounts,
new low-drag wing and upgraded wing mount
Differentials: Three metal gear, front and rear filled with 10,000cst
viscosity silicone diff oil, and center filled with 100,000cst oil
Tires: dBoots COPPERHEAD2, diameter 6.65 (169mm) with medium foam
inserts
Wheels: Split spoke matte black in color, diameter 3.82 (97mm),
17mm hex
Ball Bearings: Full set included
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
vehicle
Caster: Adjustable, castertoe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to
the chassis
Warranty: Two year limited warranty beginning at date of purchase
INCLUDES
RTR Arrma Kraton 6S BLX Speed Truck with Painted Body, 2.4GHz Radio,
Waterproof Steering Servo and Receiver Box, BLX185 ESC, 2050Kv
Brushless Motor, 12T Pinion Gear, 50T Spur Gear, extra Pinion Gear,
Instruction Manual, two IC5 Battery Connectors and Bridging Wire
for single pack use
REQUIREMENTS
LiPo Battery: One 4S or 6S battery with IC5 or EC5 connector, or
two 2S or 3S batteries with IC5 or EC5 connector, Arrma
recommends 35C 5000mAh batteries
Battery Charger: To match selected battery
AA Batteries: Four for transmitter
LiPo charging bag & track equipment
SPECIFICATIONS
Length: 23.39 (594mm)
Width: 18.15 (461mm)
Height: 7.68 (195mm)
Wheelbase: 14.84 (377mm)
Weight: 10.67lbs (4.85kg) without battery
Maximum Battery Dimensions: 6.22 x 1.89 x 2.76 (158 x 48 x 70mm)
Ground Clearance: 1.85 (47mm)
Final Drive Ratio: 17.92:1
Final Gear Ratio Range: 9.77 - 17.92
Gear Pitch: 1.0 Module
Spur Gear: 50T
Pinion Gear: 12T
Torque Split: 5050
Front Spring Rate: 1.09Nmm
Rear Spring Rate: 0.87Nmm
Diff Crown Gear Specification: 43T 0.9m
Diff Pinion Gear Specification: 10T 0.9m
